• 1.0 out of 5 stars

    Digital Video Firewire

    Simply does NOT work. Sony 8mm camcorder firewire to mac, inop. Canopus ADVC-100, inop. No source for firewire to thunderbolt works. No way to input older video to work with it without going through a 2006 MacBook Pro and capturing to an external drive. Can't up grade the MacBook Pro because I loose a connection to the devices. Apple needs to let firewire do its job. I keep my cars for 10 years, I expect my computers to do the same. Sorry Apple but I'm a cheap "bushtard" that way :)

    15 of 16 people found this useful

  • 1.0 out of 5 stars

    SLOW!

    Crushingly slow at transferring data and the thunderbolt plug keeps falling out of the imac. I've gone back to USB to use Time Machine.

    15 of 16 people found this useful

  • 5.0 out of 5 stars

    FireWire adaptor for connecting DV camcorder to Mac

    This lead is a perfect way to import HDV or mini DV tapes from camcorder - mine is a Sony HDR - HC7 - to Final Cut Pro X or another video editing software on a Mac. Gives full control of the camcorder from the computer interface. Simple to set up and works faultlessly - recommended!

    24 of 26 people found this useful

  • 4.0 out of 5 stars

    Works with bus-powered RAID from OWC (Mercury Elite Pro)

    This adapter works with the OWC Mercury Elite Pro RAID drive (2 disks) and does not need extra power on a Late 2013 Retina MacBook Pro.

  • 1.0 out of 5 stars

    Does not work... Crashes my iMac few times a day

    I am very disappointed. I have an older LaCie Rugged with FireWire (both 800 and 400) and USB 2.0 ports. All my photos are on LaCie. When I am exporting files from Lightroom, iMac shuts down randomly. Also, about half the time, my iMac will not wake from sleep mode and I have to hard boot. I have tried to figure out what is long for a little over a months now. There is nothing wrong with memory, OS, software, anything I could think of. I even had Apple Store Genius look at my iMac and found nothing wrong. I used my MacBookPro and have no issues (connected to USB port). However, when I switched my LaCie to from Thunderbolt+Adapter to USB port on iMac, the problem went away totally. I have connected my new LaCie Mini to Thunderbolt without this adapter and I have not had issues so far...
    Conclusion: The Adapter must be the cause for my problems. The end.

    16 of 17 people found this useful

  • 5.0 out of 5 stars

    IT WORKS!!

    I had concerns about this adapter working after reading all the reviews where people were having issues. But for me, it works brilliantly!
    I have a mac pro 2013 at work and use the adapter with my 1tb WD My Passport Studio Portable HD. I was reading on one of the av blogs that the person had noticed the hard drive more responsive and I would agree, it does seemed a lot snappier. Anyhow, hope this helps. It saved me from buying a thunderbolt drive - at least in the short term. Cheers,

    3 of 4 people found this useful

  • 2.0 out of 5 stars

    FW800 -> Thunderbolt.. and ONLY that.

    This adapter only allows for you to connect a FW800 peripheral to a Thunderbolt port on a Mac- not vice versa. Apple, how do you expect loyal customers to upgrade to your new speedy connection protocol and STAY loyal when you don't provide them the means to? Very poor business.

    10 of 17 people found this useful

  • 1.0 out of 5 stars

    Loose connection to rmbp 15

    flaky connection to rmbp 15" thunderbolt port. the adapter is too loose on the port so connection is on and off. bad product

    12 of 12 people found this useful

  • 3.0 out of 5 stars

    Take care - not the same FireWire fitting as older iMacs!

    Like all Apple cables this is very expensive and short but stylish and well made.

    I bought it to use on my new iMac which has Thunderbolt only outlets so that I could still content FireWire devices that I used with my FireWire equipped 2009 iMac.

    However, the old iMacs have FireWire 400 outlets and this cable is the differently shaped 800 FireWire. So, a further cable or adapter is needed to connect to the device. A shame that Apple don't include this option.

    12 of 14 people found this useful

  • 5.0 out of 5 stars

    Works great, looks great!

    I purchased the Apple Thunderbolt to FireWire Adapter to use with my mid-2013 MacBook Air in order to import miniDV tapes with a camcorder with a 4-conductor FireWire port. This adapter works just fine, no problems whatsoever. It is also very small, portable, and it looks a thousand times better than any other adapter on the market. I am very satisfied with this product.

    5 of 6 people found this useful

  • 1.0 out of 5 stars

    Confirmed - Will Connect Only to TB on Computer

    This adapter works only one direction. If you want to connect the Thunderbolt end to a hard drive and the 800 FireWire to another computer - IT WILL NOT WORK! Not Designed for this.

    17 of 24 people found this useful

  • 1.0 out of 5 stars

    Doesn't support target drive

    I bought this solely to migrate from my old Mac Pro to my new one. all it does is crash the new system when I boot up the old one in Target Drive Mode.

    10 of 12 people found this useful

  • 1.0 out of 5 stars

    Bad Connection, could potentially damage your external hardware

    I bought this adaptor solely for use with my Macbook Pro 15" Retina mid 2012 and a Focusright Saffire Pro 40 sound interface. When it connects it works perfectly, however the connection is easily broken by any slight movement of the laptop - completely negating the point of the adaptor. Not only is this incredibly frustrating for creatives (imagine recording musicians mid session and this happens!!!!!!!) but potentially damaging for the hardware. I can only imagine the anger of people who's hard drives have been damaged due to this badly designed adapter.

    I should also note that my laptop was stolen mid 2013 and I replaced it with the newer model macbook pro 15" with retina - the ports are exactly the same and the same problem with the apple thunderbolt to firewire adapter continues to occur. I have a third party svga to thunderbolt adapter and funnily enough it's build quality is far superior, never comes out the port. Avoid this adapter at all costs if possible.

    20 of 21 people found this useful

  • 1.0 out of 5 stars

    Unacceptable. Ejects external drive constantly.

    Constantly ejects my hard drive. The design of the adapter with its very short semi-flexible cord significantly exacerbates any movement at both interfaces, and the firewire input does not provide a secure connection befitting professional devices. A longer, more flexible cable and a better quality firewire input would go some way toward addressing these problems.

    3 of 3 people found this useful

  • 2.0 out of 5 stars

    Works...for now

    I struggled with using my FW portable drives on the new MacBook Pro. It was uneven, then stopped completely in the first week. Apple Store replaced the adapter and it's currently working on all my drives. Though the OWC Mercury RAID now needs external power, which it never did before--I can live with that as long as it works. I'm hoping I just had a bad adapter and now all is well. Fingers crossed.

    4 of 4 people found this useful

  • 5.0 out of 5 stars

    Works

    Late 2013 27" i7 iMac. The adapter does what it says. I'm running a 6 enclosure, 11 drive FW chain no problem. A bus powered drive works fine, but I'm plugging it in at the end of the chain, so it's drawing power from the other drives, not the iMac. The adapter does get warm when doing large transfers, not too hot, but still.

    It would nicer if iMac still had a native FW port, but I doubt Apple will ever add that back on.

    3 of 5 people found this useful

  • 1.0 out of 5 stars

    Pants!!

    I'm very happy for the people (who seem to amount to less than half) who's adapters work fine but I've not been so lucky. Who would have thought luck would ever be a factor in an Apple product working or not? I use mine to connect my latest (as of end 2013) Retina Macbook to a MOTU 828 mkiii and I have to keep everything absolute still for it to stay connected, which kind of defeats the point of a laptop right? This results in me being in a constant state of terror while simultaneously mixing and performing live music (as if that isn't stressful enough as it is) and transferring data to and from my firewire drives. It doesn't fall out completely but it may as well 'cause the effect is the same. Thunderbolt end feels very loose when plugged in.
    I've always saved for longer to buy Apple 'cause, in the past at least, you feel safe in the knowledge that everything will work brilliantly. So I can't help feeling utterly betrayed after my life-long loyalty to the brand. What are you gonna do about this, Apple????? I would very much appreciate an answer and/or a replacement while I've still got hair please!
    Gutted! :(

    19 of 20 people found this useful

  • 1.0 out of 5 stars

    does. not. work.

    It would probably be a good idea when you invent new connections to have them actually work. I was trying to use FW800/Thunderbolt to connect my external drive to my NEW "fabulous" Mac Pro. Bull hockey.

    24 of 27 people found this useful

  • 5.0 out of 5 stars

    Powers canopus advc110 & Works flawlessly!

    I am using a Mid 2012 Macbook Pro Retina and the canopus advc110 to transfer VHS footage. The firewire cable sits in the thunderbolt adapter tightly without any movement and so does the thunderbolt connection in my macbook. I even tried to wiggle the connection and I had no problems. I give this 5 stars and recommend it to anyone!

    1 of 1 people found this useful

  • 5.0 out of 5 stars

    It works for me

    I have a Panasonic Camcorder thats a few years old that uses a 4-oin fire wire to transfer video from the DV Tape to the Computer. I purchased a 4-pin to 9-pin Fire Wire cable, used this adapter with my 13" Retina and it not only saw my camera but transferred the video flawlessly. Pleasantly surprised.

    4 of 4 people found this useful