• 5.0 out of 5 stars

    Works terrific! Eliminates needing the Ethernet port on your MacBook!

    Although having a port on your machine is more ideal, this nifty gadget does exactly as it's meant for. It's very portable with my other adapters and such that I take on the go. I feel an ethernet plug is one of those essential ports that should be part of the machine, but because they don't build them into the machines anymore, this is the next best thing. I find that this works fantastic to use for an ethernet connection using my Thunderbolt port of my MB Pro. I currently have a MacBook Pro Late 2013 Retina model. It has never failed me yet. Not sure about the other reviewer problems mentioned, but my use has been minimal, and has been for general use of modem/router & printer setups... or basically when direct connection is required for an initial setup and/or bluetooth setup, etc. I can connect to my device via ethernet just fine without getting errors or other problems. It was a great investment for me!

    0 of 1 people found this useful

  • 1.0 out of 5 stars

    I so wanted it to work . . .

    I have an expensive Firewire (FW) 800 external drive that I have been using for the last few years. Rock solid and fast. Got new iMac 21.5" for office. Thought I could use this FW drive with new Thunderbolt port using this $29 adapter but no luck. Checked drive on two other FW 800 systems and the drive is perfect. Just to make absolute sure, I reformatted drive then tried again. No luck. Specifically, drive displays on desktop just fine (as any external drive does) but you are unable to transfer files to or from drive. Just a spinning beach ball. Also can't eject drive. Even "Force Eject" doesn't work. You have to unplug power to drive to get it off desktop. Too bad. Bought a seagate USB 3.0 drive and it is a little faster than FW 800.

    7 of 7 people found this useful

  • 4.0 out of 5 stars

    Does what I need

    I can't speak to the issue some have had with devices that require bus power. But, for my particular need, it does the trick.

    I use an old MiniDV camcorder whose tape drive has become unreliable. The camera has a 4-conductor FireWire 400 output, so I decided to try using it as a direct camera input for iMovie. I purchased a FireWire 400 cable (4-conductor at one end and 8-conductor at the other) and patched that through a FireWire 400-to-800 adaptor plug to connect to a MacBook.

    This worked, but my newer MacBook Air has no FireWire. This Thunderbolt to FireWire adapter—effectively the third adapter in my Franken-cable—successfully connects my camcorder to my MacBook Air. Interestingly, the camera will not work properly with the current iMovie, but functions just fine with iMovie 9.09 (thankfully available as a free download, and still compatible with El Capitan).

    7 of 7 people found this useful

  • 5.0 out of 5 stars

    Great - Works for me...

    I bought this because I now have a new late 2015 27" iMac and needed a way of connecting a Focusrite Safire Pro 26. The Focurite website states that this adapter works fine and I just connected it up then and its working perfectly. Presently I've got it powering the Safire Pro 26 but will probably end up running the unit off it's AC adapter for things like phantom power. But This little adapter works perfectly.

    So a big thumbs up from me.

  • 5.0 out of 5 stars

    Worked for me

    First off, I'd like to give a shout out to my old 2004 MacBook Pro - that thing survived a few nasty spills, two owners, and the only things I had to replace on it was the battery and one of the fans. In 2013 it finally gave up the ghost, and I wasn't too interested in repairing it right away since it was no longer possible to update its software (from Apple at least). I fired it up under "target disk mode", and used this adapter to transfer its HD contents between it and my (then) new 2013 MacBook Pro, and the process went smoothly. I can't speak for the other reviews, but for this application it worked well.

    6 of 6 people found this useful

  • 3.0 out of 5 stars

    Apple Thunderbolt to FireWire Adapter failure after thirteen months

    I have a 27 inch iMac late 2013 and 9 external firewire drives. I bought the adapter in August of 2014 and have been successfully using it for about a year. In the last month 3 of my drives that were connected to the Nitro firewire hub which was connected to the iMac via the Adapter cable. The Adapter stopped working shortly after the limited warranty expired. (The configuration is iMac-->Adapter->>Firewire 800 cable -->Nitro hub-->Newertech Voyager devices containing 4TB WD drives. While it worked, the drives sometimes disappeared but were always available after a reboot. (I was never able to determine if it was the iMac's "fault" or the Voyager) The real problem is that I spent hours trying to change various cables until I took an adapter from my other Mac and tried it. Everything then worked. Is there any way to TEST the Thunderbolt to Firewire Adapter? This cost me many hours and I don't know how long it will work before this other Adapter fails.

    6 of 6 people found this useful

  • 1.0 out of 5 stars

    Doesn't even see my FW drives

    Been through 2 adapters so far on my brand new 2015 mac mini with exactly the same results. Both my external drives work great via my older mac book pro firewire800 port, but through this adapter on the new mini they aren't even recognized. Its not the thunderbolt side, when monitors are attached to the mini via mini display port i get a good image. Its a useless adapter.

    Buyer beware... this technology does not work.

    12 of 14 people found this useful

  • 5.0 out of 5 stars


    Does exactly what it's suppose to do! Allows me to access my older drives on the new Mac Pro through FireWire and it may just be me but I think my drives work faster with it.

    5 of 5 people found this useful

  • 5.0 out of 5 stars

    An excellent T-bolt > FireWire adaptor.

    I have this adaptor connected to a powered FW800 hub with 6 FW devices connected: two OWC Guardian Maximus RAID boxes, and four Mercury Elite Pros. It has been running fine for a few years now with no problems at all, doing heavy duty video and audio editing, iTunes storage, and TIme Machine backups.

    Looking at some of the one-star reviews, it is obvious that some consumers are not aware of the one-way nature of the device. It is meant to connect a Thunderbolt interface on a CPU to a FireWire-equipped external device, not the other way around.

    13 of 13 people found this useful

  • 5.0 out of 5 stars

    Works Fine

    I bought this cable to connect 2014 iMac i7 running OS X 10.11 El Capitan (Thunderbolt) to OWC Mercury Elite AL-Pro HDD external backup drive via FW800. Dedicated Apple devices work well. No issues. I am very happy. zoz

    6 of 6 people found this useful

  • 5.0 out of 5 stars

    Works as expected

    On a new (mid 2015) MBP, I used this adapter to copy the contents of a 256GB FW HD to a 2TB USB HD--a copy which took 2 hours--and it performed flawlessly. So, maybe the adapter doesn't work with certain FW hardware, but it worked for me with this setup.

    4 of 4 people found this useful

  • 3.0 out of 5 stars

    Works fine on Mac, not on PC

    I purchased this, from an Apple reseller to use with my PC (MacBook Pro already has firewire 800 port) it works well, however, if I restart my Dell T1700 with the adapter plugged in the PC will POST but fails to BOOT. Thus freezing on the boot screen indefinitely.
    The adapter and PC are both fine and have no hardware issues (Dell engineer replaced thunderbolt card and same issue), this is purely a compatibility issue.

    This adapter is not fully Windows compatible.

    However, it works well on other Macs (I have access to 2014 iMacs)

    1 of 1 people found this useful

  • 1.0 out of 5 stars

    Didn't work for harddrive and audio interface

    Too bad I haven't read the reviews before buying it. I have two external hard drive and a Focusrite Saffire LE audio interface. I rely on them for my sound recording work. I bought this adaptor, hoping that I can use them on a new macbook pro, although their light are on indicating that there are power coming through, none of devices were detected on the computer.

  • 1.0 out of 5 stars

    didn't work

    Brand new macbook pro to a mac pro and nothing is connecting.

    5 of 16 people found this useful

  • 1.0 out of 5 stars

    Failed to connect Thunderbolt drives to FW800 port

    As we purchase new external drives we're moving toward exclusively Thunderbolt for the excellent transfer speeds, but updating all our Macs takes much longer. Our hope was to use a few of these to connect new Thunderbolt GRaids and GDrives to older Macs with FW800 ports.

    No such luck. The drives are AC powered, but they fail to recognize a connection and stay dormant even when their power switch is turned on. We bought two of the adapters and used multiple FW800 cables that were tested successfully on other straight connections.

    Seems like this would be one of the primary purposes -- bridging a legacy connection -- for an adapter like this...but it was a total failure.

    14 of 21 people found this useful

  • 1.0 out of 5 stars


    I bought the cable ONLY because I need it to use my "old" FireWire disks with my new Mac Pro, but after a few minutes of use, every time I connect the disks. they suddenly ejects. Absolutely useless.

    Oh, yes, very nice plastic, very nice finishing.
    But... straight to the trashcan!

    15 of 18 people found this useful

  • 1.0 out of 5 stars


    Shooting tethered Hasselblad firewire 800 thru the Thunderbolt adaptor becomes a workaround, firstly because the connections at both ends of the adaptor are too easily dislodged, particularly the thunderbolt to laptop end. From a consumer point of view, the thunderbolt connection is remarkably insecure and dislodges very easily. I have had to resort to buying tethertool cable retainers and/ or tape to ensure a solid uninterrupted connection. This in addition to the inadequate power supply via thunderbolt, requiring powering the camera from the camera battery rather than thru the old firewire 800 cable. An inadequate overall design.

    16 of 18 people found this useful

  • 1.0 out of 5 stars


    Pro photographer here with new Macmini (2015) running a drobo with FireWire 400 & 800 using the adaptor doesn't work. Apple this is a BIG FAIL on your part!!!

    17 of 23 people found this useful

  • 3.0 out of 5 stars

    BUS power direction

    Finally received one and discovered a very interesting BUS power direction. TB --> FW800 device = ok. However, FW800 --> TB device = n/a (no power!) Even with TB AC power hub!?!

    ie TB port (ie MBP, iMac, MacPro) --> FW800 (ie external drive with BUS power, digital backs etc) will work vs FW800 port (ie old MBP) --> TB device (ie external drive) will NOT work.

    Hope that helps...

  • 5.0 out of 5 stars

    Works Perfectly

    Works perfectly and DOES power my PreSonus Firestudio Mobile. I would just like to see this as a cable instead of an adapter.

    22 of 22 people found this useful