Belkin’s WeMo Switch + Motion work together to let you use motion to turn almost anything in your home on or off. A heater, a lamp, your stereo, you name it—if you can plug it in, you can control it with WeMo Switch + Motion. WeMo works on on any iPod touch, iPhone, or iPad running iOS 5 or later. With the free WeMo app, you tell WeMo Switch + Motion what to do when motion is sensed. With multiple WeMo Switches, you can control as much or as little of your home as you like.
- Works with your existing Wi-Fi router and any iPhone, iPad, or iPod touch running iOS 5 or later
- Modular system—easily add additional WeMo Switches and WeMo Motion sensors at any time
- Control as much or as little of your home as you want
- Operates over Wi-Fi and mobile Internet, whether you're at home or away
- Six-foot power cord and 10-foot motion sensitivity range allow for optimal placement of sensor
- Put your home electronics on a schedule, telling them when to come on and when to turn off
- Free WeMo app
Did you notice?The free WeMo app adds remote home control functionality to your iOS devices.
Apple Recommends ForTurn your electronics on or off—from anywhere—using your iPhone, iPad, or iPod touch and your home Wi-Fi network.
What's in the Box?
- One Belkin WeMo Switch
- One Belkin WeMo Sensor
- User manual
- Mfr. Part Number: F5C0340fcAPL
- UPC or EAN No.: 722868864197
- Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
- Warranty: One-year limited
With the WeMo app, you can control all of your WeMo products from anywhere on your iPhone or iPad.
Be at home even when you’re not
WeMo is a family of products that you can use to control just about anything in your home – from anywhere. Adjust the temperature on your Crock-Pot® Smart Slow Cooker when you are running late at work, make sure the kids’ TV turns off at bedtime, and light up a dark room before you walk in. WeMo is designed to make your life a whole lot easier.
Set it, forget it, and get notifications
Don’t ever worry that you left your porch light on by setting a rule to turn off at sunrise, set alerts to let you know when your dryer cycle is done so your clothes won’t get wrinkled, and have your lights and electronics deter intruders by simulating occupancy while you are lying on a beach in Hawaii.
These are just some of the things you can do with the WeMo app.
Integrate WeMo with IFTTT
With IFTTT (if this then that), you can connect your home to the web for endless possibilities. Set your sprinklers to stay off when rain is in the forecast or have the lights come on when you approach your front door. You can even have the lights flash when your favorite team scores.
If you can think of it, you can probably WeMo That.
Check out what else you can do with WeMo at:
1-800-MY-APPLE or Chat now
iPad (1st generation)
iPad 2 (2nd generation)
iPad (3rd generation)
iPod touch 3rd Generation
iPod touch 4th Generation
iPod touch 5th Generation 32GB/64GB
Ratings & Reviews
This product is great. It works perfectly. I have my living room lamps plugged into it. They go on when I enter the room, and shut This product is great. It works perfectly. I have my living room lamps plugged into it. They go on when I enter the room, and shut off 5 minutes after I leave. The sensor works perfectly. Not sure what the previous reviewer was talking about. Also, you can set it to only turn them on during certain hours so the lights aren't coming on during the day. …
- Written by Ryan A from Brockville
93 of 118 people found this useful
One Location Only
The iPhone App will only work with one location (one Router). I try to set it up with my home and vacation home, failed. Otherwise The iPhone App will only work with one location (one Router). I try to set it up with my home and vacation home, failed. Otherwise, it's working really well. …
- Written by James C from Riverside
57 of 71 people found this useful
Wemo does not adjust for sunrise and sunset
I bought two light switches about 6 months ago, for outdoor lights. Easy to install and set-up. However, despite setting and re- I bought two light switches about 6 months ago, for outdoor lights. Easy to install and set-up. However, despite setting and re-setting the rules numerous times, they will not turn on at sunset and off at sunrise per the rules I set. It may start following the sunset/sunrise rules, but then does not appear to keep up with the daily changes or change to daylight savings time. Turns on now at 5 pm even though sunset is at about 7 pm. Minimalist instructions and support make it difficult to troubleshoot. I have to rate it a 1 because the main reason for purchasing this product is to automate the lights so that they go on at sunset and off at sunrise and it does not do that reliably. …
- Written by Mark E from NORFOLK
38 of 42 people found this useful
Same bad experience as most
I have had nothing but problems with this product (I own 2 motion sensors, and 4 switches), but in my last and final attempt to in I have had nothing but problems with this product (I own 2 motion sensors, and 4 switches), but in my last and final attempt to interact with Belkin "Level 2 support" I learn today that even after uninstalling and reinstalling the app with an iPhone reset in between, an ZERO WeMo devices on the network (which incidentally uses an Apple Airport Extreme as the WiFi AP and Router to the internet), on the reinstalled app ALL the devices and their firmware version still show up until about 2 minutes later at which point they all gray out.
The customer support person told me that's becuase my iCloud stores old data that stays around even after the app is deleted and reinstalled....WHAT?? Verification of my iCloud settings show that the WeMo app DOES NOT have access to my iCloud.
Additionally, I was told that I should configure the devices through WiFi only becuase the app "sometimes chooses cellular data over WiFi, depending on which is stronger and that's why some devices don't show up".
Excuse me? When my iPhone is on a WiFi network ALL data goes over WiFi - it's not a split network.
I'm done! …
- Written by Kevin D from Troy
Got the WEMO switch that plugs into a socket. Very difficult to find information regarding troubleshooting. Another product for Got the WEMO switch that plugs into a socket. Very difficult to find information regarding troubleshooting. Another product for Hazardous Waste. …
- Written by Joseph R from Fargo
Frustrating to say the Least
Connects, disconnects, shows some devices but not all, shows all devices until you try to use one then it vanishes, comes back whe Connects, disconnects, shows some devices but not all, shows all devices until you try to use one then it vanishes, comes back when it feels like it, convinces another device to sneak away with it.
This worked great 2 years ago. It got progressively worse for some reason. I'm removing all the devices and throwing them in the trash. …
- Written by Larry G from Nesconset
2 of 2 people found this useful
Questions & Answers
Answers from the community
It's only a motion sensor. I works in conjunction with a switch. It tells whatever that's plugged in It's only a motion sensor. I works in conjunction with a switch. It tells whatever that's plugged into the switch when to turn on/off. Yes, you do have to buy a separate switch. …
- Answered by Urick M from Yonkers
- Nov 10, 2012
will it turn my tv on, or just have the tv go to standby
- Asked by Kenneth J from Cleveland
- Sep 9, 2014
DOES IT WORK IN IRELAND
- Asked by Siobhan M from Killarney
- Nov 6, 2013
Yes, it works fine, and now with the fact that there is an IFTTT channel it's even more useful.
- Answered by John K
- Apr 8, 2014
will it turn my tv on, or just have the tv go to standby
- Asked by Martin C
- Jan 11, 2013
This depends on your TV. In most cases it will put your TV into standby mode
The best way to answ This depends on your TV. In most cases it will put your TV into standby mode
The best way to answer this is to test the TV as follows.
Without the Belkin Wemo Switch connected if you connect the TV to the power socket. Does it go into standby or does it power on. If it goes into standby mode, then that is exactly what the Belkin Wemo Switch will do. If it powers on, then that is exactly what the Belkin Wemo switch will do.
The Belkin Wemo switch cuts off the power supply and initiates the power supply back to the device either through its motion sensor or Wemo App. …
- Answered by Belkin Uk 1
- Feb 11, 2013
Does this product capable of dual voltage?
- Asked by Christopher F from Apo
- Jul 1, 2012
It's the 3 pin 240v version (just the wrong photo) They are amazing units and easy to set up. They d It's the 3 pin 240v version (just the wrong photo) They are amazing units and easy to set up. They don't mention that you can also control via SMS & email &......
The list is endless. Got mine to control the boiler, far better than a timer …
- Answered by Huw L
- Oct 22, 2012