Apple software updates often include advanced energy-saving technologies, so always make sure your device is using the latest version of iOS, Watch OS or OS X.
Your device is designed to perform well in a wide range of temperatures, with 16° to
22° C (62° to 72° F) as the ideal comfort zone. It’s especially important to avoid exposing your device to temperatures higher than 35° C (95° F), which can permanently damage battery capacity. That is, your battery won’t power your device as long on a given charge. Charging the device in high temperatures can damage it further. Even storing a battery in a hot environment can damage it irreversibly. When using your device in a very cold environment, you may notice a decrease in battery life, but this condition is temporary. Once the battery’s temperature returns to its normal operating range, its performance will return to normal as well.
iPhone, iPad, Apple Watch and iPod work best at 0° to 35° C (32° to 95° F). Storage temperature: -20° to 45° C (-4° to 113° F).
MacBook works best at 10° to 35° C (50° to 95° F). Storage temperature: -20° to 45° C (-4° to 113° F).
Charging your device when it’s inside certain styles of cases may generate excess heat, which can affect battery capacity. If you notice that your device gets hot when you charge it, take it out of its case first.
If you want to store your device long term, two key factors will affect the overall health of your battery: the environmental temperature and the percentage of charge on the battery when it’s powered down for storage. Therefore, we recommend the following:
- Do not fully charge or fully discharge your device’s battery — charge it to around 50 per cent. If you store a device when its battery is fully discharged, the battery could fall into a deep discharge state, which renders it incapable of holding a charge. Conversely, if you store it fully charged for an extended period of time, the battery may lose some capacity, leading to shorter battery life.
- Power down the device to avoid additional battery use.
- Place your device in a cool, moisture-free environment that’s less than 32° C (90° F).
- If you plan to store your device for longer than six months, charge it to 50 per cent every six months.
Depending on how long you store your device, it may be in a low-battery state when you remove it from long-term storage. After it’s removed from storage, it may require 20 minutes of charging with the original adapter before you can use it.
Always make sure your device is using the latest version of iOS.
- If you are using iOS 5 or later, see if you need an update. Go to Settings > General > Software Update.
- If an update is available, you can plug your device into a power source and update wirelessly or plug it into your computer and update with the latest version of iTunes.
There are two simple ways you can preserve battery life — no matter how you use your device: adjust your screen brightness and use Wi‑Fi.
Dim the screen or turn on Auto-Brightness to extend battery life.
- To dim, swipe up from the bottom of any screen to open Control Centre and drag the Brightness slider to the left.
- Auto-Brightness adjusts your screen to lighting conditions automatically. To activate it, go to Settings > Display & Brightness and set Auto-Brightness to On.
When you use your device to access data, a Wi‑Fi connection uses less power than a mobile network — so keep Wi‑Fi on at all times. There are two ways to turn on Wi‑Fi:
- Swipe up to open Control Centre, tap the Wi‑Fi icon and log in to a Wi‑Fi network.
- Go to Settings > Wi‑Fi to access a Wi‑Fi network.
iOS 8 is designed to be the most battery-efficient iOS ever. And it gives you more precise ways to manage your device’s battery life, because you can see the proportion of your battery used by each app (unless the device is charging). To view your usage, go to Settings > General > Usage > Battery Usage.
Here are the messages you may see listed below the apps you’ve been using:
Background Activity. This indicates that the battery was used by the app while it was in the background — that is, while you were using another app.
- To improve battery life, you can turn off the feature that allows apps to refresh in the background. Go to Settings > General > Background App Refresh and set the switch to Off.
- If the Mail app lists Background Activity, you can choose to fetch data manually or increase the fetch interval. Go to Settings > Mail, Contacts, Calendars > Fetch New Data.
Location and Background Location. This indicates that the app is using location services.
- You can optimise your battery life by turning off Location Services for the app. Turn off in Settings > Privacy > Location Services.
- In Location Services, you can see each app listed with its permission setting. Apps that recently used location services have an indicator next to the on/off switch.
Home & Lock Screen. This indicates that the Home screen or Lock screen was displayed on your device. For example, the display was awakened by pressing the Home button or by a notification.
- If an app frequently wakes your display with notifications, you can turn off push notifications for the app in Settings > Notifications. Tap App and set Allow Notifications to Off.
No Mobile Coverage and Low Signal. This indicates that either you are in a poor mobile coverage area and your iOS device is searching for a better signal or that you’ve used your device in low-signal conditions, which has affected your battery life.
- You can optimise your battery life by turning on Airplane mode. Swipe up to open Control Centre and tap the Airplane mode icon. Note that you cannot make or receive calls while in Airplane mode.
Make sure your computer is plugged in and powered on when you’re using it to charge your iOS device via USB. If your device is connected to a computer that’s turned off or is in sleep or standby mode, your device’s battery may drain. Note that iPhone 3G and iPhone 3Gs cannot be charged with a FireWire power adapter or FireWire-based car charger.
Always make sure your device is using the latest version of Watch OS.
- To see if you need an update, go to Settings > General > Software Update.
- If an update is available, you can plug your device into a power source and update wirelessly, or plug it into your computer and update with the latest version of iTunes.
There are a few ways you can preserve battery life on your Apple Watch:
- Enable Power Saving mode for workouts.
- For longer workouts, consider using a chest strap to monitor your heart rate.
- If you’re very active with your hands and your watch is on more than you think it should be, you can turn off the Activate on Wrist Raise feature. Then, when you want to turn on your Apple Watch, just tap it.
- Keep Bluetooth enabled on your iPhone for more efficient communication between devices.
To view your usage and standby information, launch the Apple Watch app on your iPhone and go to General > Usage.
If you want to charge from your computer, make sure it is plugged in and powered on when you’re using it to charge your Apple Watch via USB. If your device is connected to a computer that’s turned off or is in sleep or standby mode, your device’s battery may drain.
Use Apple or an authorised service provider for service.
Always make sure your iPod is using the latest version of Apple software. Put your iPod in its dock or plug it into your computer, and iTunes will notify you of available updates.
Hold and pause. Set the Hold switch when you’re not using your iPod. This will prevent iPod from accidentally waking up and using unnecessary power. If you’re not listening to your iPod, pause it, or turn it off by pressing the Play button for two seconds.
Equaliser (EQ). Adding EQ to playback increases use of your iPod processor, since EQ isn’t encoded in the song. Turn EQ off if you don’t use it. If, however, you’ve added EQ to tracks in iTunes, you’ll need to set EQ to “flat” in order to have the effect of “off” because iPod keeps your iTunes settings intact.
Backlight. Setting the backlight to “always on” will significantly reduce your battery life. Use the backlight only when necessary.
Make sure your computer is plugged in and powered on when you’re using it to charge your iPod via USB. If your iPod is connected to a computer that’s turned off or is in sleep or standby mode, the iPod battery may drain.
Always make sure your MacBook is using the latest version of OS X. If you’re connected to the Internet, OS X automatically checks for software updates every week, but you still control when the updates are installed. To confirm that you’re using the latest software, go to the Apple menu and choose Software Update.
Energy. The Energy Saver preference pane includes several settings that determine power levels for your MacBook. Your MacBook knows when it’s plugged in and runs accordingly. When using battery power, it dims the screen and uses other components sparingly. If you change this setting to maximise performance, your battery will drain more quickly.
Brightness. Dim the screen to the lowest comfortable level to achieve maximum battery life. For instance, when watching a video on an aeroplane, you may not need full brightness if the cabin lights are off.
Wi‑Fi. Wi‑Fi consumes power, even if you are not using it to connect to a network. You can turn it off in the Wi‑Fi status menu in the menu bar or in Network preferences.
Applications and peripherals. Disconnect peripherals and quit applications not in use. Eject an SD card if you’re not currently accessing it.
Make sure your MacBook is plugged in and powered on when you’re using it to charge other devices via USB. Otherwise those devices may drain the battery in your MacBook faster than normal. If another device is connected to your MacBook when it’s turned off or in sleep or standby mode, the device’s battery may drain.