Questions & Answers for Thunderbolt to FireWire Adapter
107 Questions from the Community
Is this what I need to connect from an iMac mid 2010 to a new iMac late 2015 both running the same OS.
The iMac 27 mid2010 has a Fire wire port (Female)
The iMac 27 Late 2015 has a Thunderbolt connection
I have a Thunderbolt male to male cable
Is this adaptor what I need to accomplish the transfer of all data from iMac 2010 to iMac 2015
Thanks for any and all help.
will this adaptor allow an older Mac Pro early 2009 to work with a thunderbolt display?
old to new
- Asked by Roger O from Moreno Valley
- Flag as inappropriate (will this adaptor allow an older Mac Pro early 2009 to work with a thunderbolt display?)
I would like to record videos straight to my Macbook Pro.
Can someone, anyone, please break down for me the equipment I will need to do connect my Sony Handicam (HDR-CX160) to my Macbook Pro, so that I might record straight to the laptop?
Like, fourth grade level, because I'm not computer savvy at all.
- Asked by Marta R from Harker Heights
- Flag as inappropriate (I would like to record videos straight to my Macbook Pro.)
Can I connect my external drive to my iMac using a thunderbolt to firewire adaptor?
I have an iMac 27 inch (mid 2011) with two thunderbolt slots. (1) Can i connect my WD "My Passport" external drive to my iMac using a thunderbolt to firewire adaptor; (2) Will that quicken the pace of data transfer (for backup, time-machine etc.)? (3) Am also planning on upgrading to a new iMac in a few months (when the new iMacs are announced), so will I be able to transfer all my data from my old iMac quicker using a thunderbolt connection from my external drive? Thanks kindly for any assistance.
- Asked by Ilan K from Toronto
- Flag as inappropriate (Can I connect my external drive to my iMac using a thunderbolt to firewire adaptor?)
Will this work with the new Macbook Pro thunderbolt 3 (usb-c) ports?
- Asked by Jonathan S from Astoria
- Flag as inappropriate (Will this work with the new Macbook Pro thunderbolt 3 (usb-c) ports?)
what adapters do i need to convert model sony/dcr-trv18 to mac 10;12;2 late 12
to dvc cassettes
- Asked by Lawrence F from Naperville
- Flag as inappropriate (what adapters do i need to convert model sony/dcr-trv18 to mac 10;12;2 late 12)
How is possible to connect a new Thunderbolt 3 port to an old Firewire 400 port?
I' have a new MacBook and must to connect an old audio board MOTU ultralite have only 2 audioWire female ports (with standard FireWire 1694- 400)
It's possibile to use the new thunderbolt 3 port? Downgrade of transfer rate is supported?
If it's possible, please, where i can found an adpater cable?
- Asked by Arnaldo P from Cagliari
- Flag as inappropriate (How is possible to connect a new Thunderbolt 3 port to an old Firewire 400 port?)
Apple sadly doesn't offer Thunderbolt 3 to Firewire adapters. But for a Thunderbolt 3 port, you should be able to use an Apple Thunderbolt 3 to Thunderbolt 2 Adapter, and then connect a Thunderbolt to Firewire Adapter to that.
Unfortunately, the 2015 and 2016 MacBooks (not MacBooks Pro) do not have a Thunderbolt 3 port — it is merely a USB-C port. And there is no way to go from USB to Firewire in a sensible way; they are so utterly different protocols that you'd essentially need an entire computer to convert from one to the other.
(There were a couple converter boxes fifteen years ago that claimed to convert between USB and Firewire, but they only claimed to work for DV homevideo, and from all accounts, didn't really do that, either.)
- Answered by Chris H
- Flag as inappropriate Answer (How is possible to connect a new Thunderbolt 3 port to an old Firewire 400 port?)
Do I need an adapter to connect a FW400 to my thunderbolt firewire adapter
- Asked by Benjamin R from North Providence
- Flag as inappropriate (Do I need an adapter to connect a FW400 to my thunderbolt firewire adapter)
Will this adapter connect directly to the new MacBook Pro 2016 USB-c/thunderbolt ports?
I have some older Firewire800 drives that I use with my late 2009 iMac, and have purchased the new MacBook Pro 2016 13" w/ touch bar. Will this work on its own or do I need something else?
- Asked by Robin N from Jacksonville
- Flag as inappropriate (Will this adapter connect directly to the new MacBook Pro 2016 USB-c/thunderbolt ports?)
This adapter has a thunderbolt 1 style plug. It won't work with USB-c/TB3. I think it will work with a TB to TB3 adapter. I have such an adapter and it works with my Belgian TB dock, which has a Firewire800 port. I haven't tried the FW800 on the dock, but USB 3.0 and the Displayport connector all work. I think This adapter would work with a TB to TB3 adapter.
- Answered by Eric F from Lutherville
- Flag as inappropriate Answer (Will this adapter connect directly to the new MacBook Pro 2016 USB-c/thunderbolt ports?)
Can I use a FireWire adapter to link a Mac book Pro and an iPad air?
I have a faulty hard drive in my Mac book pro and need to recover data from it before swapping hard drives. I cannot perform a backup because I cannot get on the laptop. I don't have another Mac available but have an iPad air. Is it possible to use a FireWire adapter to make the iPad air a host and the Mac book pro the target to recover data from?
- Asked by Patrick S from Pacific Grove
- Flag as inappropriate (Can I use a FireWire adapter to link a Mac book Pro and an iPad air?)
Why are there 2 firewire adapters? MD464zm/a and MD464ll/a
What are the differences/similarities between these 2 adapters?
I am trying to connect to a digital audio mixer, and it's a little fussy.
- Asked by Victor G from St. Adolphe
- Flag as inappropriate (Why are there 2 firewire adapters? MD464zm/a and MD464ll/a)
Evidently the MD464zm/a was an early version, it's not available any more.
- Answered by David L from Redlands
- Flag as inappropriate Answer (Why are there 2 firewire adapters? MD464zm/a and MD464ll/a)
Will this allow users to start a Thunderbolt-equipped Mac in "Target Disk Mode" and access it via a FireWire-only Mac? (And vice-versa)
I know that Thunderbolt-to-Thunderbolt Target Mode is available and obviously FireWire-to-FireWire, but I'm more curious about using Target Disk mode to support older Macs with newer ones and vice versa.
- Asked by Josef L from Tacoma
- Flag as inappropriate (Will this allow users to start a Thunderbolt-equipped Mac in "Target Disk Mode" and access it via a FireWire-only Mac? (And vice-versa))
I have tested a cross Thunderbolt to FireWire "Target Disk Mode" connection using an Apple Thunderbolt to FireWire Adapter both ways ("master" and "slave" roles done either way). The OS was 10.8.1. The computers were Mid 2012 MacBook Air with Thunderbolt (only) and 2010 MacBook Pro 13" with FireWire (only).
First of all I confirmed that the actual "Target Disk Mode" connection worked both ways when the machines switched roles as "master" or "slave". When the FireWire (only) machine is "slave" the FireWire Symbol shows on the screen. When the Thunderbolt (only) machine is slave you sometimes see both a Thunderbolt symbol and a modified FireWire symbol.
As a test of actual practical use for troubleshooting, I installed the latest version of DiskWarrior (4.4) on both machines and then ran DiskWarrior from the "master" machine" to the "slave machine" both ways having the Thunderbolt and FireWire machines switch roles.
Everything worked beautifully.
Interestingly I asked Apple floor staff at Apple Ginza Tokyo store (non-genius) if this would work, and I was told that "Target Disk Mode" used between Thunderbolt and FireWire machines had not yet been confirmed. The impression I got was that the Thunderbolt to FireWire adapter is mainly promoted for connection of FireWire equipped externals (like hard disks etc) to the new Thunderbolt machines. "Target Disk Mode" use seems to be "something nerdy" that few users would ever attempt :-D
I use it with mine, so yes you can. Be wary of the bad connection with the adaptor though, it falls out with the slightest movement.
- Answered by Ashley E
- Flag as inappropriate Answer (Can I use this cable with my sapphire pro40)
You need a few items to make this work.
Firstly you need the thunderbolt to firewire adapter, then you need either a firewire 800 to 4 pin firewire cable OR a standard Sony iLink firewire 400 cable and a 800 to 400 adapter.
I already had the Sony iLink 400 cable so went with the 800 to 400 adapter.
Connect everything together and put the camera into playback/VCR mode. Open whatever Mac video program you're using (iMovie 9/Final Cut Pro X work fine) then go to capture and a window will open allowing you to control the camera from the program.
Look at the specifics for the program you are using.
My camera is a Sony PCR100 Hi8 camera from early 2001 and this method works perfectly with my 2013 iMac.
I use my RME fireface 400 via a firewire/thunderbolt adapter with my 15" macbook pro for Logic. This trick also works for my 2010 mac book air as well though I don't use logic there.
User forum at RME has notes about 800 use as well.
- Answered by William R from Amsterdam
- Flag as inappropriate Answer (I am considering upgrading my Mac. Will my RME Fireface 800 audio interface work with the Firewire/Thunderbolt cable?)
Just bought a Mac Thunderbolt to Firewire Adapter to fit my PC Motherboard (GIGABYTE GA-Z77X-UP4). It did not work. The physical female end inside of the motherboard sits differently than the adapter Mac has. You should also be aware that the side of the packaging states "Compatible with Thunderbolt-equipped mac computers." It stinks, but I will be returning it and waiting for more compatible adapters for sure or maybe just have to keep PCIe Firewire card for my audio work. It still works fine; just wanted a different alternative.
- Answered by Adam B from Baton Rouge
- Flag as inappropriate Answer (Will the Apple Thunderbolt to firewire adapter work on PCs (Asus, for example) that have the Thunderbolt ports ?)
The 2008 iMac does not support Target Display Mode (which works over a mini DisplayPort to mini DisplayPort cable, not Firewire) BUT as long as the computer is operable, you can use third party software to use it as an external display for your MacBook Pro. Look into the Air Display app.
- Answered by Kevin W from San Antonio
- Flag as inappropriate Answer (can I use 2008 iMac with firewire as display for macbook pro with thunderbolt)
Can this adapter be used to transfer my files from a Late 2009 IMac to a brand new fusion IMac. I have a firewire 800 cable.
I am getting a new IMac 27" with fusion drive. I would like to transfer my files from my Late 2009 27" iMac. Can I use the firewire to thunderbolt adapter for this purpose?
- Asked by Jose O from Coral Gables
- Flag as inappropriate (Can this adapter be used to transfer my files from a Late 2009 IMac to a brand new fusion IMac. I have a firewire 800 cable.)
Can this be used to connect a Firepod audio interface to my iMac?
I looking to connet a Firepod (Firewire 400 audio interface) that I use to record music (with Garageband) to my laptop and a new iMac. Neither have Firewire so would this adaptor work? The Firepod has its own power so no problem there. Does anyone have experiences to share?
- Asked by Keith M
- Flag as inappropriate (Can this be used to connect a Firepod audio interface to my iMac?)
You will need a firewire 800 to 400 adapter. I have the same solutuion for my firewire audio interface
- Answered by Frederick P from Temple Hills
- Flag as inappropriate Answer (Can this be used to connect a Firepod audio interface to my iMac?)