Will Windows 7 (bootcamp) recognize a thunderbolt ethernet adapter?
- Asked by Jason R from Brookfield
- Flag as inappropriate (Will Windows 7 (bootcamp) recognize a thunderbolt ethernet adapter?)
14 Answers from the Community
The previous "yes" answer is correct, it does indeed work under Wndows 7 Bootcamp, but the answer is a bit light on detail for a couple of the steps. Here's a fuller explanation:
1) download the driver per the instructions in the previous answer
2) unzip the drivers to a temporary folder on your hard drive
3) connect the adaptor to the thunderbolt port
4) reboot Windows
Windows should automatically detect the adaptor now and install it. You may need to point the installer at the location where you unzipped the drivers.
If Windows doesn't automatically install the device...
1) go to Start > Control Panel > Hardware & Sound and open Device Manager
2) click the name of your computer at the top of the device tree
3) click Action at the top of the window and choose Add Legacy Hardware
4) Click Next
5) Select "Install hardware that I manually select..."
6) Choose Network Adaptors
7) Choose "Have Disk"
8) Browse to the location of the drivers you unzipped earlier.
9) Click the .inf file
10) Select Broadcom NetXtreme Gigabit Ethernet from the list of drivers available
11) OK and install
You may need to reboot again with the adaptor plugged into the Thunderbolt port to finish the job,
- Answered by Benjamin C from London
- Flag as inappropriate Answer 1
Google "broadcom driver windows netxtreme".
Select the netxtreme I Desktop/Mobile driver.
Install via device manager (select location where you unzipped driver).
Note, the PCI ID for this device 14e4:1682 is not listed in Broadcom's web page list of supported IDs. However the driver's .inf does include the requisite matching for the new device ID.
- Answered by Scott F
- Flag as inappropriate Answer 2
I successfully installed the driver in Window 7 per Benjamin C's instructions. Yes the Thunderbolt to Gigabit Ethernet Adapter does work in Windows 7 Boot Camp, however the SLEEP MODE is disabled after installing the driver. (I am using MacBookPro-Retina)
Somehow Windows complains that the firmware does not support (S3) Sleep mode.
It's unreasonable for a notebook not to be able to quickly go into sleep mode and wake up from it. Hibernate just takes too long.
Apple, please respond to this issue.
- Answered by Allen W from Melbourne
- Flag as inappropriate Answer 3
Only half way- using either the Broadcom driver or the driver that installs within the package from Lion (BC4.0), the adapter will work so long as you boot Windows 7 fresh with the adapter installed.
1) Insert the adapter after booting,
2) Unplug and attempt to re-insert the adapter without rebooting
... the adapter does not work. Fairly useless for a laptop. Use the USB->Ethernet adapter instead, its the same price although does limit to 100Mb.
- Answered by Sarkis K from Reno
- Flag as inappropriate Answer 4
Yes it will work SORT OF, if you have the corret drivers either put in place by the Bootcamp setup (where you include the drivers as part of Windows install) or if you just install once in Windows.
BUT it wil never support Sleep mode - so it's completely useless as a laptop.
I want to shut the lid and it enter Sleep - NOT hibernate.
To get this you need to buy a USB to Ethernet adaptor. I have done just this today and bought one from Amazon which was £15 for USB3 to Gig Ethernet - made by Digitus. WIndows 7 auto detects and installs drivers and now I have my Macbook Pro (retina) useful as a laptop again.
Don't wait for Apple to update their Thunderbolt Windows 7 support to include S3 standby as I suspect it will be ages/never, just spend the £15 to do it vi USB :)
- Answered by K G
- Flag as inappropriate Answer 5
I have followed all the instructions here on my new MacBook Air, i7 and the ethernet gets up and going but I have no internet access for some reason on it. I was trying to sync my dropbox faster than it taking a week and use Gigabit Ethernet.
Disabling and enabling resulted in a massive slow down, then I shut down, which froze, then BSOD. Restarted and it's up and running fine, I am on the network. But no internet.
I have a Gigabit switch with 8 ports so that is working, it's just not getting the internet from the ADSL router. Has turned in to a real pain.
- Answered by Matthew A
- Flag as inappropriate Answer 6
Followed the same steps provided by Benjamin C and it works, but I need to reboot everytime I connect the adapter in windows. It does not get recognized if I plug it after my windows is loaded.
Is there anyway to get the adapter recognized automatically when I plug it after windows is loaded?
- Answered by Umavenkat M from Burbank
- Flag as inappropriate Answer 7
I found that booting my Macbook Air to OS X with the adapter attached, then shutting it down and booting the Windows 7 (Boot Camp) side of the hard drive retains the functionality of the adapter. No external driver install is necessary. If the adapter is unplugged from the Thunderbolt port (it's not hot-swappable), then the sequence of booting to OS X, closing, and booting Windows 7 must be repeated. This, of course, would only apply to those who have both operating systems installed.
The disruption of the sleep mode is still the same issue as has been mentioned. I'd really like to solve that one.
- Answered by Kim S from Miami
- Flag as inappropriate Answer 8
Unless I'm doing it wrong, there doesn't appear to be an .inf file in the unzipped file. Is there anywhere else to download this file??
- Answered by David M from Bellingham
- Flag as inappropriate Answer 9
- Answered by Nguyen L from Alanta
- Flag as inappropriate Answer 10
- Answered by Sathanapong J from Bangkok
- Flag as inappropriate Answer 11
Without a doubt
- Answered by Elizabeth B
- Flag as inappropriate Answer 12
- Answered by Chung H
- Flag as inappropriate Answer 13
- Answered by Brian S
- Flag as inappropriate Answer 14
Does this Work in windows 7 Bootcamp or can i recognize it and if Yes do i still need to install something
- Asked by Jedrek N from Manila
- Flag as inappropriate (Does this Work in windows 7 Bootcamp or can i recognize it and if Yes do i still need to install something)
- Asked about: Apple USB Ethernet Adapter
Will bootcamp let me install a bootable windows 10 on this?
- Asked by Joseph F from Virginia Beach
- Flag as inappropriate (Will bootcamp let me install a bootable windows 10 on this?)
- Asked about: G-Technology 1TB G-DRIVE Mobile Por…