• 5.0 out of 5 stars

    Worked out pretty well for me!

    I bought this for my Mac Pro 2013 because my Audio Interface (Steinberg MR816csx) needed this FireWire Adapter. I was a bit scared if it would work or not, but it works just fine! Really happy! :-)

    1 of 1 people found this useful

  • 1.0 out of 5 stars

    Had to buy another

    Using some legacy FW 400 sound gear - have to buy an adapter for the adapter.

  • 5.0 out of 5 stars

    Works fine for my use (Migration Assistant)

    I bought this adapter (and the Thunderbolt 2 to Thunderbolt 3 adapter) to connect my 2009 MacBook Pro (using the firewire port) and my new 2016 MacBook Pro (w/o TouchBar). I started the older MacBook in target mode, and then ran the Migration Assistant on the new MacBook. Everything went OK, and was much faster than WiFi. I have an older firewire hard drive, and that works fine through the adapter.
    I can't comment on the longevity of the adapter.

    0 of 1 people found this useful

  • 1.0 out of 5 stars

    breaks super fast

    i have bought 2 of these and both only lasted me 4-6 uploads from my videocamera before breaking. i thought maybe it was my fire wire so i got a new fire wire but nothing changed. i tested both firewires directly into very old computers that still had the firewire plug and both worked fine. Amazing how a technology developed by apple in the late 80s works better than the adapters they make for that tech now...

    1 of 2 people found this useful

  • 4.0 out of 5 stars

    Works fine---but not forever!

    My adapter perfectly accommodated my 9-drive external FW800 daisy chain to my Thunderbolt-equipped Macbook Pro. After a little over 2 years of light use---estimated at about 3 hours per day for the year--- the external drives along the daisy chain started having connectivity and random unmounting of volumes issues. I finally swapped a fresh Apple Thunderbolt to Firewire adapter into the line, and all issues disappeared. Buy one, and then buy a spare.

    1 of 1 people found this useful

  • 5.0 out of 5 stars

    HDV camera - FW to Thunderbolt

    Purchased the adapter to support moving data from a Canon HDV-20 video camera to my Macbook Pro. I run a FW 400 to FW 800 cable to this adapter. Works as designed and intended.

    2 of 2 people found this useful

  • 5.0 out of 5 stars

    Works Perfectly

    I'm using this adapter to connect a 4 drive array to my 2014 Mini. Works exactly like it should. Have been using 24/7 for 2 weeks without issue.

  • 5.0 out of 5 stars

    Works great for me

    I have two older LaCie FW external HD's. Bought new 21.5 Retina display iMac running Sierra. This adapter works perfectly and the performance is even faster than straight FW connection to the old iMac.

    I wonder if some folks are trying to use this adapter for something it was not designed to do.

    4 of 4 people found this useful

  • 5.0 out of 5 stars

    Firewire 800 to Thunderbolt Adapter

    I am using it to connect a NewerTech GMax Mini to my new Mac Mini 3.0Ghz//16/2T Fusion. Works very well.

  • 1.0 out of 5 stars

    Not working for professional medium format digital cameras

    It doesn't work with medium format digital cameras. When shooting tethered, the camera stop working with an "communication error" message. On top of it, the adapter quickly becomes hot. In a nutshell: Useless, and possibly dangerous for the integrity of the equipment.

    Many pro photographers are coming back to Windows, no wonder.

  • 5.0 out of 5 stars

    iMac 5k to Legacy FW 800

    Recently upgraded to a late 2015 5k 27" iMac from an early 2009 iMac. I have 3 FW 800 drives and they all are detected and work fine with this adapter. My drives are Drobo Gen 2 (powered), Western Digital My Book Studio (powered) and a Western Digital My Passport Studio (in chain).

    I was concerned given all the mixed reviews so I hope this may help others with a similar configuration.

    Alan

    8 of 8 people found this useful

  • 5.0 out of 5 stars

    Works terrific! Eliminates needing the Ethernet port on your MacBook!

    Although having a port on your machine is more ideal, this nifty gadget does exactly as it's meant for. It's very portable with my other adapters and such that I take on the go. I feel an ethernet plug is one of those essential ports that should be part of the machine, but because they don't build them into the machines anymore, this is the next best thing. I find that this works fantastic to use for an ethernet connection using my Thunderbolt port of my MB Pro. I currently have a MacBook Pro Late 2013 Retina model. It has never failed me yet. Not sure about the other reviewer problems mentioned, but my use has been minimal, and has been for general use of modem/router & printer setups... or basically when direct connection is required for an initial setup and/or bluetooth setup, etc. I can connect to my device via ethernet just fine without getting errors or other problems. It was a great investment for me!

    1 of 8 people found this useful

  • 1.0 out of 5 stars

    I so wanted it to work . . .

    I have an expensive Firewire (FW) 800 external drive that I have been using for the last few years. Rock solid and fast. Got new iMac 21.5" for office. Thought I could use this FW drive with new Thunderbolt port using this $29 adapter but no luck. Checked drive on two other FW 800 systems and the drive is perfect. Just to make absolute sure, I reformatted drive then tried again. No luck. Specifically, drive displays on desktop just fine (as any external drive does) but you are unable to transfer files to or from drive. Just a spinning beach ball. Also can't eject drive. Even "Force Eject" doesn't work. You have to unplug power to drive to get it off desktop. Too bad. Bought a seagate USB 3.0 drive and it is a little faster than FW 800.

    23 of 23 people found this useful

  • 4.0 out of 5 stars

    Does what I need

    I can't speak to the issue some have had with devices that require bus power. But, for my particular need, it does the trick.

    I use an old MiniDV camcorder whose tape drive has become unreliable. The camera has a 4-conductor FireWire 400 output, so I decided to try using it as a direct camera input for iMovie. I purchased a FireWire 400 cable (4-conductor at one end and 8-conductor at the other) and patched that through a FireWire 400-to-800 adaptor plug to connect to a MacBook.

    This worked, but my newer MacBook Air has no FireWire. This Thunderbolt to FireWire adapter—effectively the third adapter in my Franken-cable—successfully connects my camcorder to my MacBook Air. Interestingly, the camera will not work properly with the current iMovie, but functions just fine with iMovie 9.09 (thankfully available as a free download, and still compatible with El Capitan).

    25 of 25 people found this useful

  • 5.0 out of 5 stars

    Great - Works for me...

    I bought this because I now have a new late 2015 27" iMac and needed a way of connecting a Focusrite Safire Pro 26. The Focurite website states that this adapter works fine and I just connected it up then and its working perfectly. Presently I've got it powering the Safire Pro 26 but will probably end up running the unit off it's AC adapter for things like phantom power. But This little adapter works perfectly.

    So a big thumbs up from me.

    1 of 1 people found this useful

  • 3.0 out of 5 stars

    Apple Thunderbolt to FireWire Adapter failure after thirteen months

    I have a 27 inch iMac late 2013 and 9 external firewire drives. I bought the adapter in August of 2014 and have been successfully using it for about a year. In the last month 3 of my drives that were connected to the Nitro firewire hub which was connected to the iMac via the Adapter cable. The Adapter stopped working shortly after the limited warranty expired. (The configuration is iMac-->Adapter->>Firewire 800 cable -->Nitro hub-->Newertech Voyager devices containing 4TB WD drives. While it worked, the drives sometimes disappeared but were always available after a reboot. (I was never able to determine if it was the iMac's "fault" or the Voyager) The real problem is that I spent hours trying to change various cables until I took an adapter from my other Mac and tried it. Everything then worked. Is there any way to TEST the Thunderbolt to Firewire Adapter? This cost me many hours and I don't know how long it will work before this other Adapter fails.

    9 of 9 people found this useful

  • 1.0 out of 5 stars

    Doesn't even see my FW drives

    Been through 2 adapters so far on my brand new 2015 mac mini with exactly the same results. Both my external drives work great via my older mac book pro firewire800 port, but through this adapter on the new mini they aren't even recognized. Its not the thunderbolt side, when monitors are attached to the mini via mini display port i get a good image. Its a useless adapter.

    Buyer beware... this technology does not work.

    22 of 24 people found this useful

  • 3.0 out of 5 stars

    Works fine on Mac, not on PC

    I purchased this, from an Apple reseller to use with my PC (MacBook Pro already has firewire 800 port) it works well, however, if I restart my Dell T1700 with the adapter plugged in the PC will POST but fails to BOOT. Thus freezing on the boot screen indefinitely.
    The adapter and PC are both fine and have no hardware issues (Dell engineer replaced thunderbolt card and same issue), this is purely a compatibility issue.

    This adapter is not fully Windows compatible.

    However, it works well on other Macs (I have access to 2014 iMacs)

    8 of 14 people found this useful

  • 1.0 out of 5 stars

    Didn't work for harddrive and audio interface

    Too bad I haven't read the reviews before buying it. I have two external hard drive and a Focusrite Saffire LE audio interface. I rely on them for my sound recording work. I bought this adaptor, hoping that I can use them on a new macbook pro, although their light are on indicating that there are power coming through, none of devices were detected on the computer.

    2 of 2 people found this useful

  • 3.0 out of 5 stars

    BUS power direction

    Finally received one and discovered a very interesting BUS power direction. TB --> FW800 device = ok. However, FW800 --> TB device = n/a (no power!) Even with TB AC power hub!?!

    ie TB port (ie MBP, iMac, MacPro) --> FW800 (ie external drive with BUS power, digital backs etc) will work vs FW800 port (ie old MBP) --> TB device (ie external drive) will NOT work.

    Hope that helps...