How is possible to connect a new Thunderbolt 3 port to an old Firewire 400 port?
I' have a new MacBook and must to connect an old audio board MOTU ultralite have only 2 audioWire female ports (with standard FireWire 1694- 400)
It's possibile to use the new thunderbolt 3 port? Downgrade of transfer rate is supported?
If it's possible, please, where i can found an adpater cable?
- Asked by fn from Cagliari
- Flag as inappropriate (How is possible to connect a new Thunderbolt 3 port to an old Firewire 400 port?)
- Asked about: Apple Thunderbolt to FireWire Adapt…
7 Answers from the Community
I have successfully connected an old (2001) Sony DCR-PC110 Mini-DV camcorder to my MacBook Pro 2016 via a Thunderbolt / Firewire chain. I used the following adapters to connect the Sony's 1394 / Mini-DV connection to MacBook Pro USB-C: Apple Thunderbolt 3 [USB-C] to Thunderbolt 2 [Mini DisplayPort] (MMEL2AM/A) --> Apple Thunderbolt 2 [Mini DisplayPort] to Firewire 800 [9-Pin] (MD464LL/A) --> Tripp Lite Firewire 800 [9-Pin] to Firewire 400 [4-Pin, 1394] (F019-006). All in about $90.
I was able to control the camcorder and capture video from Mini-DV tapes.
This chain may work for other Firewire 400/800 peripherals.
- Answered by Greg F from Bristol
- Flag as inappropriate Answer 1
Apple sadly doesn't offer Thunderbolt 3 to Firewire adapters. But for a Thunderbolt 3 port, you should be able to use an Apple Thunderbolt 3 to Thunderbolt 2 Adapter, and then connect a Thunderbolt to Firewire Adapter to that.
Unfortunately, the 2015 and 2016 MacBooks (not MacBooks Pro) do not have a Thunderbolt 3 port — it is merely a USB-C port. And there is no way to go from USB to Firewire in a sensible way; they are so utterly different protocols that you'd essentially need an entire computer to convert from one to the other.
(There were a couple converter boxes fifteen years ago that claimed to convert between USB and Firewire, but they only claimed to work for DV homevideo, and from all accounts, didn't really do that, either.)
- Answered by Chris H
- Flag as inappropriate Answer 2
I got Focusrite Saffire Pro 40 working with OWC Thunderbolt 3 Dock using a Firewire 400 to Firewire 800 adapter, connected to a 2017 MacBook Pro running Mac OS 10.13.1. If you see a situation where the Mac system report shows the Thunderbolt 3 device, and the Saffire Pro 40 Firewire device, but not the audio device, then this is likely a preference problem. Try removing all your audio preferences, and rebooting. This worked for me. Remove these files and reboot:
After doing this, all my Firewire audio devices are now showing up on my new MacBook Pro connected through Thunderbolt 3.
- Answered by James A from Cary
- Flag as inappropriate Answer 3
You will need 3 adapters :/ tb3 to tb2 + tb2 to fw800 then fw800 to fw400. i imagine soon there will be a tb3 to fw400 or at least to fw800 cable made by Belkin or Moshi or one of those 3rd party adapter people.
be careful of USB type-c. it. the identical connector can be either USB 2.0, USB 3.0, USB 3.1 and also thunderbolt 3. plus i think some can do different variations of video out and some can do charge input...
also be careful of cables suggesting otherwise.. Thunderbolt and Firewire can never pass over any type of USB controller into any machine...
all the best
- Answered by Joel D from Prahran
- Flag as inappropriate Answer 4
I have a new iMac and have used a thunderbolt 3 to thunderbolt 2 convertor, a thunderbolt 2 to firewire 800, a firewire 800 to mini fire wire convertor and can control my legacy Sony DCR-PC330E camcorder from Final Cut Pro.
I have also used a thunderbolt 3 to thunderbolt 2 convertor, a thunderbolt 2 to firewire 800, a firewire 800 to 400 to control a RME Fireface 400 audio interface. There is not enough power from the iMac to run the Fireface 400, so you need to use an external PSU. My trusty MacBook Pro from 2011 could power the Fireface with no problems.
All connectors and cables bought from Apple.
- Answered by Jeff B
- Flag as inappropriate Answer 5
I can confirm that I got my Focusrite Pro 40 (FireWire 400) working with my 2016 Macbook (Thunderbolt 3/USB-C ports) by using a number of adaptors:
FireWire 400 -> FireWire 800 -> Thunderbolt 2 -> USB-C
The only issue I ran into was that macOS High Sierra would not load the drivers automatically, I had to manually approve the developer before they would load.
- Answered by Peter M from Pleasant Hill
- Flag as inappropriate Answer 6
I have both a MOTU Ultralite MK3 soundcard and a T.C. Electronic Desktop Connect 6 for which I use two adapters:
- Thunderbolt 3 Thunderbolt 2
- Thunderbolt 2 to firewire (400 and 800)
It's not ideal (why a firewire to thunderbolt 3 adapter does not exist is pretty strange right?) but I can confirm this works.
The Desktop connect works with bus power, the MOTU needs an external power adapter.
- Answered by Martijn J
- Flag as inappropriate Answer 7
thunderbolt to firewire400 adapter?
- Asked by Stacey K from West Bloomfield
- Flag as inappropriate (thunderbolt to firewire400 adapter?)
- Asked about: Apple Thunderbolt to FireWire Adapt…
Does this adapter work with as a Thunderbolt 3 to Display Port also?
- Asked by Kirk F from Lincolnwood
- Flag as inappropriate (Does this adapter work with as a Thunderbolt 3 to Display Port also?)
- Asked about: Thunderbolt 3 (USB-C) to Thunderbol…
Can I use this Thunderbolt 3 cable to connect my new Mac to my older Mac (late 2013) which has a Thunderbolt port but is that port compatible.
- Asked by Catherine And Colin K from New York
- Flag as inappropriate (Can I use this Thunderbolt 3 cable to connect my new Mac to my older Mac (late 2013) which has a Thunderbolt port but is that port compatible.)
- Asked about: Thunderbolt 3 (USB‑C) Cable (0.8 m)