Studio Display XDR - Technical Specifications

Studio Display XDR
Display

5K Retina XDR display

  • 27‑inch (diagonal) 5K Retina XDR display
  • 5120x2880 resolution at 218 pixels per inch
  • Mini-LED backlight with 2,304 dimming zones
  • Up to 1,000 nits brightness (SDR)
  • 2,000 nits peak1 brightness (HDR)
  • 120Hz refresh rate and Adaptive Sync
  • Support for 1 billion colours
  • P3 + Adobe RGB wide colour gamuts
  • True Tone technology

Configurable with:

  • Nano-texture glass
Reference Modes

Available reference modes:

  • Studio Display XDR (P3-2,000 nits)
  • Studio Display XDR (P3 + Adobe RGB-2,000 nits)
  • HDR Video (P3-ST 2084)
  • HDTV Video (BT.709–BT.1886)
  • NTSC Video (BT.601 SMPTE-C)
  • PAL and SECAM Video (BT.601 EBU)
  • Digital Cinema (P3-DCI)
  • Digital Cinema (P3-D65)
  • Design and Print (P3-D50)
  • Design and Print (Adobe RGB-D50)
  • Photography (P3-D65)
  • Photography (Adobe RGB-D65)
  • HDR Photography (P3-D65)
  • Internet and Web (sRGB)
Camera
  • 12MP Center Stage camera with Desk View
Audio
  • High‑fidelity six‑speaker system with force‑cancelling woofers
  • Wide stereo sound
  • Support for Spatial Audio when playing music or video with Dolby Atmos
  • Studio‑quality three‑mic array with high signal‑to‑noise ratio and directional beamforming
  • Support for “Hey Siri”
Connections

Two Thunderbolt 5 ports (up to 120Gb/s) and two USB-C ports (up to 10Gb/s)

  • One upstream Thunderbolt 5 port for host (with 140W host charging)
  • One downstream Thunderbolt 5 port for connecting high‑speed accessories or daisy-chaining additional displays
  • Two USB‑C ports (up to 10Gb/s) for connecting peripherals, storage and networking
  • USB‑C
  • Thunderbolt 5
Back view of Studio Display XDR, showing two USB‑C ports and two Thunderbolt 5 ports
Stand
  • Tilt- and height-adjustable stand
  • Tilt: −5° to +25°
  • Height adjustment: 105mm in total
  • Orientation: landscape

Configurable with:

  • VESA mount adapter
  • Compatible with 100 x 100 mm VESA stand
  • Orientation: landscape or portrait
Size and Weight

Studio Display XDR with tilt- and height-adjustable stand

Height (bottom position): 47.8 cm (18.8 inches)

Width: 62.3 cm (24.5 inches)

Height (top position): 58.3 cm (23.0 inches)

Weight: 8.5 kg (18.7 pounds)2

Depth: 21.4 cm (8.4 inches)

Side view of Studio Display XDR with tilt- and height -adjustable stand, showing height of display, bottom position Back view of Studio Display XDR with tilt- and height -adjustable stand, showing width measurement Side view of Studio Display XDR with tilt- and height -adjustable stand, showing height of display, top position Stand depth:
21.4 cm
8.4 inches
Height, bottom position:
47.8 cm
18.8 inches
Width:
62.3 cm
24.5 inches
Height, top position:
58.3 cm
23.0 inches
Stand Depth:
21.4 cm
8.4 inches

Studio Display XDR with VESA mount adapter

Height: 36.2 cm (14.3 inches)

Width: 62.3 cm (24.5 inches)

Depth: 3.3 cm (1.3 inches)

Weight: 6.3 kg (13.9 pounds)2

Side view of Studio Display XDR with VESA mount adapter, showing height and depth measurements Back view of Studio Display XDR with VESA mount adapter, showing width measurement Stand depth:
3.3 cm
1.3 inches
Height:
36.2 cm
14.3 inches
Width:
62.3 cm
24.5 inches
Compatibility

Studio Display XDR is compatible with the following Mac models with Apple silicon and macOS Tahoe 26.3.1 or later:

  • 16‑inch MacBook Pro (2021 and later)
  • 14‑inch MacBook Pro (2021 and later)
  • 13‑inch MacBook Pro (M1, 2020 and later)
  • 15‑inch MacBook Air (2023 and later)
  • 13‑inch MacBook Air (M1, 2020 and later)
  • Mac Studio (2022 and later)
  • Mac mini (2020 and later)
  • Mac Pro (2023 and later)
  • 24‑inch iMac (2021 and later)

Mac models with M1, M1 Pro, M1 Max, M1 Ultra, M2 and M3 support Studio Display XDR at up to 60Hz. All other Studio Display XDR features are supported.

Studio Display XDR is compatible with the following iPad models with iPadOS 26.3.1 or later:3

  • iPad Pro (M4 and M5)
  • iPad Pro 12.9-inch (3rd–6th generation)
  • iPad Pro 11-inch (1st–4th generation)
  • iPad Air (M2, M3 and M4)
  • iPad Air (5th generation)

iPad Pro (M5) supports Studio Display XDR at 120Hz. All other compatible iPad models support it at 60Hz.

In the Box
  • Studio Display XDR
  • Thunderbolt 5 Pro Cable (1m)
Studio Display XDR and Thunderbolt 5 Pro cable
Electrical and Operating Requirements
  • Line voltage: 100–240V AC
  • Frequency: 50Hz to 60Hz, single phase
  • Oper­at­ing temperature: 10° to 35° C (50° to 95° F)
  • Relative humidity: 5% to 90% non-condensing
  • Maximum altitude: tested up to 5,000 metres (16,400 feet)
Limited Warranty and Service

In Ireland, consumers are entitled to a free-of-charge repair or replacement, by the seller, of goods that do not conform with the contract of sale. Under Irish law, consumers have up to six years from the date of delivery to exercise their rights; however, various factors may impact your eligibility to receive these remedies. For more details, click here.

Your Studio Display XDR also comes with 90 days of complimentary technical support and a one-year limited warranty from Apple. To learn more about how Apple will service your Studio Display XDR, click here.

Purchase AppleCare+ to get up to three years of expert technical support and hardware coverage, including unlimited repairs for accidental damage from handling, each subject to an excess fee. For more information, click here.

Con­fig­ure to Order
  • Con­fig­ure your Studio Display XDR with these options at apple.com:
  • Nano-texture glass
  • VESA mount adapter

Studio Display XDR and the Environment

Studio Display XDR is designed with the following features to reduce its environmental impact:4

Progress towards Apple 2030

Apple 2030 is our commitment to be carbon neutral for our entire carbon footprint. Our plan to decarbonise products is rigorous and focuses on transitioning to low‑carbon electricity, designing with recycled and low‑carbon materials and prioritising lower‑carbon ways of shipping products, like sea freight.

See Apple’s commitment

Materials

  • 100% recycled aluminium in the stand
  • 100% recycled copper in multiple printed circuit boards
  • 100% recycled copper and zinc in the AC inlet pins
  • 80% recycled glass in the standard glass
  • 100% recycled gold plating and tin solder in all Apple-designed printed circuit boards
  • 100% recycled rare earth elements in all magnets

Energy

ENERGY STAR® certified5

Packaging

100% fibre-based packaging6

Waste

No established final assembly sites generate waste sent to landfill as part of Apple’s Zero Waste Programme7

Smarter chemistry8

All of the materials used in Apple products, accessories and packaging are covered by the requirements of our Regulated Substances Specification, which was one of the first in industry to restrict the use of key substances of concern. See the latest Environmental Progress Report to understand Apple’s recent efforts in phasing out these chemistries.